You could ask the plumbing company that installs your new heater to dispose of the old one for you. If the old heater is still in good condition, you can donate it to charity. You can also locate a landfill that will accept water heaters near you and dispose of it there. These three ways may be an additional expense to you. Or you can sell your old heater to a recycling center or a scrap yard.
Some of the different components that make up a water heater like copper and brass tubing and fittings, the gas regulator, or electric thermostat are valuable, with buyers willing to pay more for these if they are in good working condition. Water heaters are made of aluminum, brass, copper, and steel. The individual metal components are worth much more if you take the time to disassemble and clean the tank yourself.
Electric water heaters are lightweight, quiet, and boast the highest efficiency of any storage water heater. But the price of electricity is so high in most places that relatively inefficient fuel-fired heaters cost less to operate.
Tankless water heaters can be either gas-burning or electric tankless; however, gas tanks typically last longer. These heaters are compact and ultra-efficient units that heat water as you need it. This means you could save a considerable amount of money annually.
The amount of money you can get scrapping a water heater will depend on many factors; while you can scrap a whole water heater, valuable components within it, such as copper pipes, can earn you more money separately at the scrap yard. Below, we explain how much you can expect to get for a scrap water heater and how to find a place that will buy your water heater.
The easiest way to dispose of an old water heater for scrap is to bring the entire unit to a scrap yard, but this will also get you the least amount of money. When you bring a whole water heater into a scrap yard, you get the going rate for light iron, light steel, shred, or mixed metal.
Note the exact price you get for your water heater will depend on the current spot price of scrap metal, the weight of your water heater, and your location. Prices in the scrap market fluctuate daily.
There are several valuable elements that you can separate from the water heater that have higher scrap prices than light iron, shred, or mixed metal. This will help you get the most money from your water heater.
The weight of only the copper, brass, and aluminum elements of the water heater will be lower than the weight of the full tank, and the total you make from these metals will still be dependent on their quality and quantity. However, by separating the water heater, you can get the highest possible value for each element and should still be able to scrap the rest of the tank as mixed metal, increasing your total profit.
Several parts of a water heater are made of copper, which is more valuable to scrap separately. Copper scrap prices at the time of writing are around $1.50 to $2.50 per pound, depending on the type of copper, which is notably higher than the light iron price. Components made of copper include:
Think about it: The way most households in this country heat water is absurdly wasteful. We fill up big 40- to 50-gallon storage tanks, then pour energy into them 24/7, year in and year out, to make sure we have hot water at the ready whenever we want it.
This is definitely a job for a pro, as it involves making leak-free water, vent, and gas connections, in the case of gas or propane units, or upgrading the wiring and circuit-breaker panel, in the case of electric units.
Gas-burning tankless water heaters should operate for 20 years or more, two or three times longer than tank-type heaters. Tankless electric units have shorter life spans, on the order of 7 to 10 years.
Owners of vacation homes know well how long it takes to drain a water-heater tank before closing up a house for the winter. With a compressor, you can drain a tankless heater in a few seconds; then you just unplug it.
When the distance between heater and fixture exceeds 50 feet, look for units with a built-in recirculation pump, which saves water and reduces waiting time. The pump, which can be turned on by a timer, a push button, a motion sensor, a smart speaker, or a smartphone (above), pushes the cold water in the pipes back through the heater.
Also, electric heaters last only about half as long as gas units: Typical warranties are three to five years. Once the heating elements fry, it usually costs about as much to replace the entire heater as it does to swap in new elements.
Noncondensing tankless gas heaters use stainless-steel vents that can withstand high exhaust heat. Condensing units have a cooler exhaust, and use less expensive PVC pipes. A concentric vent, which has an exhaust pipe inside a larger air-intake pipe, simplifies installation because only one hole needs to be cut in the wall.
Water heaters are scrapping opportunities for the taking! With a little work, they can help prop up your bottom line throughout the year. Often we have contractors or plumbing companies bring old water heaters to us to be recycled. However, are you getting the most out of your water heater scrapping
With several locations across Buffalo and Western New York, you can easily find Metalico when you need to recycle water heaters. Whether you bring it whole or pieced out, our team will help you find a competitive price for your efforts. Our facilities are also compliant with all regulatory standards surrounding responsible recycling processes, so you will be doing your part to help the environment! Contact us today to learn more about recycling with Metalico.
Hot water heater installation costs depend on the type of hot water heater getting installed. Tank-style water heaters come in various sizes from 20 gallons to 60 or more gallons. Tank-style water heaters can come as gas-powered, electric, propane-fueled or solar-powered. Tankless water heaters vary by their gallons per minute rate.
Small tank-style water heaters can get installed for as low as $500 while bigger tanks can cost as much as $3,000 installed. A 50-gallon tank water heater can cost around $1,000 installed. Tankless water heaters have similar costs, though a tankless style water heater will cost more than a tank-style water heater, the installation can cost less, however. Gas-powered tankless water heaters can cost more to install than electric-powered units.
Storage tank water heaters are most common and homes and have a distinct tall, cylindrical shape. Tankless water heaters typically come in a rectangular shape and can get installed in several areas. Both types of water heaters can use different fuel sources to run.
Storage tank water heaters can cost around $500 to $800, but costs vary on the size of the tank. Installing a tank-style hot water heater averages between $650 and $2,100.
Tankless water heaters have pros and cons and they have gained popularity as people strive to make their homes energy efficient. Tankless water heaters cost vary depending on the type because you can choose from a whole-house tankless water heater or multiple single point units Also, the type of fuel you use can change the price. Tankless water heaters can cost between $500 to $1,500. The cost to install a tankless water heater is between $1,000 and $3,500.
When choosing electric vs. gas tank-style water heaters, the installation costs can vary slightly. Installing an electric tank-style water heater can range between $800 and $1,500. A gas-powered storage tank water heater can cost between $400 and $800 installed. Installation costs depend on the size of the tank and any additional work needed.
Gas tankless water heater installation typically costs between $900 and $1,500. Electric tankless water heater installation costs between $150 and $1,000. Find the best gas tankless water heater for your home or choose the best electric tankless water heater, depending on your preference.
Tank-style water heaters have either a direct vent or a power vent to push the exhaust from the heater out of the home through a vent flue. If you switch from an electric direct vent tank-style water heater to a direct vent gas model, it usually costs between $500 and $1,000 to install the vent pipe.
Labor costs to install a hot water heater will depend on the length of time it takes, along with other considerations. Switching from one type of water heater to another will have more costs than replacing one with the same kind. Any electrical work or additional plumbing work can add to the installation costs.
A local plumber can typically install gas or electric water heaters and charge between $45 and $150 an hour. If you need additional electrical work, like a new outlet, circuit or wiring, a local electrician can charge $50 to $100 an hour.
Opinions vary on whether you should buy a water heater from a plumber or from a retailer. You might find better prices at a retailer, but it puts the onus on you to find the best water heater for your home by doing thorough research. A plumber can provide expertise and help you find the right water heater for your home.
Water heaters can fail if they spring a leak, which can happen if corrosion occurs. Most water heaters will leak around the drain pipe, T&P relief valve or the drain return. Heating elements can also fail over time, potentially leading to a replacement hot water heater
A 40-gallon water heater unit can cost from $400 to $7,000 and installation can cost $1,000 on average, bringing the project total to between $1,400 and $8,000. Costs can rise depending on the amount of labor needed, whether any additional water or gas lines are needed or extra plumbing or electric work.
First, cut off the power and disconnect the water heater from the energy source. If you have a gas water heater, use the cutoff valve to shut down the gas line and prevent gas leaks. For an electric water heater, flip the breaker in your service panel to completely shut off the power. 59ce067264